| FORUM

FEDEVEL
Platform forum

USE DISCOUNT CODE
EXPERT30
TO SAVE $30 USD

Male DC Plug Power Adapter for PCB

MuhammedHesham , 01-11-2019, 11:15 AM
is there Male DC Plug Power Adapter for PCB so i can solder it directly to the pcb to power 4 ip cameras through it ... attached left photo of suggest component but i can't find through hole one of it so i can solder the terminal screw and use the male plug
Another Question
Does male plug cable effective one or there is another suggestion ... i remember last time i use .. it got damaged after use it frequently
Thanks alot.
robertferanec , 01-14-2019, 01:23 AM
- I do not understand exactly, are you looking for female for the power jack? If yes, maybe this can help to give you an idea what to search for: https://www.digikey.sk/product-detai...02AH-ND/408446
- cables and connectors are different qualities - some are more robust then other. If you use a very thin cable, it may get damaged quite soon.
Comments:
MuhammedHesham, 01-14-2019, 03:52 AM
sorry .. i replied below so i can attach Pic
MuhammedHesham , 01-14-2019, 03:47 AM
- I want something like this attached picture.. to solder it or any another idea that give Dc adapter cable for ip camera

-Yes , this PJ-002AH damaged when i used it alot ..

- what is the perfect softwere to make 3D models or make a little bit of
modifications of solidwork model or step or any another format from 3D central center

-- Thanks A lot 💙💙💙
robertferanec , 01-14-2019, 04:05 AM
I still do not understand, Do you want just the green part of the connector? Because you can buy that (I have used it on some projects, but I would have to search for it). However, the green part is just to connect wires, it is not jack.
Comments:
MuhammedHesham, 01-14-2019, 06:33 AM
-the problem in this component (male dc Jack+ Green terminal screw) that the green part doesn't have leads for through-hole mounting .. and i want the green part with leads for through-hole mounting .. so i can solder it================================================== ========- what is the perfect softwere to make 3D models or make a little bit of modifications of solidwork model or step or any another format from 3D central center================================================== ========-- Thanks A lot 💙💙💙
Paul van Avesaath , 01-14-2019, 02:36 PM
so the be clear you want a female PCB power jack part for your design?

usually you put one of these on the PCB. male part or just a screw terminal..

the combination you ask for is not really an option i think..

als you can just make two pads on the PCB and use them as solder pads, if you just want to hook up wires.....


easiest way to get what you want is to put a normal DC power pcb plug on there (the male part)

take your cable.. cut off the male connector, and solder on a female connector.. job done. (custom but it will work)

or put a screw terminal on your PCB, and cut off the male connector of your cable strip the wires and screw them to the pcb with the terminalblock
MuhammedHesham , 01-14-2019, 02:43 PM
what about this combination
i hope i will be stable
Thanks Paul van Avesaath
Paul van Avesaath , 01-14-2019, 02:57 PM
That would work too!
robertferanec , 01-16-2019, 04:55 AM
- I have never seen boards with male jack on it. Maybe the reason why you can not find that jack is, because you are looking for a non standard solution?
- For 3D models I use designspark mechanical ( https://www.rs-online.com/designspar...nical-software ). But the free version can not do anything with STEP - you would need to buy Addon module: https://designspark.zendesk.com/hc/e...cles/211867685 Here is the link to buy it: https://export.rsdelivers.com/catego...A-4390_393628|
Use our interactive Discord forum to reply or ask new questions.
Discord invite
Discord forum link (after invitation)

Didn't find what you were looking for?