USE DISCOUNT CODEEXPERT30TO SAVE $30 USD
Setting shape on conductor layer to have shape to via clearance
msapack , 12-10-2020, 06:37 PM
Hi Robert,
I have a layer on my board that has both signal traces and shapes. I am trying to set the shape to via clearance to 0.2mm, but the default is set to 0.1 mm. When I change the constraint in the constraint manager to 0.2 and update the shapes, the clearance around the via is still 0.1mm and does not change.
I have attached a screenshot of the issue.
There is one "PLANE" layer that has a clearance of 0.2mm as shown, and the smaller clearance is the "CONDUCTOR" layer that should be set to 0.2 mm, but is not updating.
Any idea how to fix this issue?
Thanks,
Megan
I have a layer on my board that has both signal traces and shapes. I am trying to set the shape to via clearance to 0.2mm, but the default is set to 0.1 mm. When I change the constraint in the constraint manager to 0.2 and update the shapes, the clearance around the via is still 0.1mm and does not change.
I have attached a screenshot of the issue.
There is one "PLANE" layer that has a clearance of 0.2mm as shown, and the smaller clearance is the "CONDUCTOR" layer that should be set to 0.2 mm, but is not updating.
Any idea how to fix this issue?
Thanks,
Megan
robertferanec , 12-11-2020, 08:04 AM
Maybe this can help: https://youtu.be/bU2Ef-2ZIK4?t=1883
Use our interactive Discord forum to reply or ask new questions.