USE DISCOUNT CODEEXPERT30TO SAVE $30 USD
Power width rules issue
ZsoltFulop , 01-18-2021, 10:21 AM
HI all
I was set the Power width rules for 0.4mm, first I was try to write to the custom query: InNet ('+') OR InNet('GND') but it doesnt work, so I decided to add every net start with '+' (as you can see on the attached image), which still not change the power track width.
I also changed the priority for the rules but still nothing changed.
What I have done wrong?
I was set the Power width rules for 0.4mm, first I was try to write to the custom query: InNet ('+') OR InNet('GND') but it doesnt work, so I decided to add every net start with '+' (as you can see on the attached image), which still not change the power track width.
I also changed the priority for the rules but still nothing changed.
What I have done wrong?
robertferanec , 01-18-2021, 11:15 AM
If you would like to use wildcards such "+" you may need to use "like" expression: https://youtu.be/w9gxB6XVHnk
ZsoltFulop , 01-19-2021, 05:31 AM
Many thanks,
I will have a look on it.
I will have a look on it.
Use our interactive Discord forum to reply or ask new questions.