Bad linux ARM zImage magic!
avion , 12-17-2018, 05:03 AM
Hello everyone and @robertferanec
Im testing the sabresd sdcard image on a different board based on the sabresd board with the same cpu but this board has 2Gb ram and sabresd has 1Gb. I am able to see the uboot in the serial console but then Ä± get an error saying :
mmc: no card present ***Bad device mmc 1 ***
Booting from net ...
***ERROR: ' ethaddr' not set***
Bad Linux ARM zImage magic!
I believe its looking for the booatble mmc 1 memory on the board but cant find kernel there so its looking at ethernet but still cant find it. However my kernel images is in the sd card which i think is MMC 0. how can I tell uboot to find the zImage in sdcard or is the image totally incompatible with my board due to RAM difference etc..???
robertferanec , 12-18-2018, 04:59 AM
In uboot use help
command. You may also need: printenv
and other commands. You may need to update environmental variables.
There are differences between different uboots, but maybe this can give you an idea how setenv works: https://www.imx6rex.com/open-rex/sof...cto_try_kernel
Use our interactive Discord forum
to reply or ask new questions.